✓ Licensed & Insured✓ South Florida · Since 2013✓ Free Estimates & Financing
Call (954) 353-9770 · Mon–Sat 7a–7p
Flat · TPO · Modified Bitumen

Flat & Low-Slope Roofing in Miami

We install and repair flat and low-slope roofs — TPO, modified bitumen and older tile-and-gravel — plus ponding-water fixes and re-covers. Flat roofs in Miami typically run $6–$12/sq ft installed, all built to Florida Building Code for South Florida's tropical downpours. Call (954) 353-9770 for a free estimate.

Licensed & Insured10+ Years on South Florida RoofsTile · Shingle · Metal · Flat SpecialistsFree EstimatesFinancing Available

Flat & Low-Slope Roofing in Miami from a licensed, insured contractor who has worked on South Florida roofs since 2013 — honest written pricing, free estimates, and financing available.

What's included

  • TPO single-ply membrane systems
  • Modified bitumen (torch and self-adhered)
  • Re-covers and full tear-off replacements
  • Ponding-water and drainage correction
  • Seam, flashing and parapet-wall repair
  • Flat additions, patios, condos and multifamily roofs

Roofing in South Florida: what makes flat & low-slope roofing different here

Flat roofs are everywhere in South Florida — on MiMo and mid-century homes, rear additions, condos and small commercial buildings. Two things kill them here: water that ponds because the roof has no real slope, and seams that open as the membrane bakes under year-round UV. In a climate that can drop several inches of rain in an afternoon, standing water finds every weak seam. We correct the slope so water actually drains toward the scuppers and drains, weld or torch the membrane properly, and detail the parapet flashing to hold up in wind-driven rain. All materials carry Florida Product Approval.

What flat & low-slope roofing costs in Miami

We publish real ranges up front. Here is what South Florida homeowners typically pay in 2026:

ServiceTypical South Florida cost (2026)
Flat / TPO roof (installed)$6–$12 / sq ft
Modified bitumenQuoted per roof
Re-cover over sound membraneLess than full tear-off
Ponding / drainage correctionPart of the scope
Seam & flashing repairFrom ~$350

Directional 2026 South Florida ranges — your written estimate is free and specific to your roof.

Your price depends on the size and pitch of the roof, the material, access and what the inspection finds — and we put it in writing before any work starts. A roof is a real investment, so we also offer financing to keep it affordable.

Re-cover, repair, or replace your flat roof?

If the membrane is sound, a re-cover or seam repair restores it for less. If seams are failing across the roof or water is trapped in the insulation, a full tear-off is the honest call. We will tell you which — see flat roof options in Miami and our commercial roofing service.

Ponding water and why flat roofs leak in South Florida

Flat roofs are not truly flat. They are built with a slight slope so water drains toward outlets. When that slope is wrong, when drains clog, or when the structure sags over time, water sits in puddles long after a storm passes. That is ponding water, and it is the number one killer of flat roofs in South Florida.

Standing water finds every weak seam, degrades the membrane under constant UV, and adds real weight to the structure. During hurricane-season downpours it overwhelms a tired roof fast and pushes water back under laps and flashings. We fix ponding at the source instead of papering over it, re-establishing positive slope with tapered insulation, clearing and adding drains, and re-flashing the spots where water pools against walls and curbs. A patch laid over a ponding problem just fails again at the next storm, so we always address the cause, not the symptom. If a leak has already started inside, our leak repair crew can stop the bleeding first.

TPO, modified bitumen, and your flat-roof options

Most South Florida flat and low-slope roofs land on one of these two systems, depending on how much life the existing roof has left:

SystemCost and lifespan
TPO single-ply membrane$6 to $12 per sq ft, 15 to 25 years
Modified bitumen$6 to $11 per sq ft, 15 to 20 years

TPO is a white, heat-welded membrane that is reflective, seamless at the welds, and durable, our usual pick for a full re-cover when the old roof is spent. Modified bitumen is a tough, multi-ply system that stands up well to foot traffic and the older tile-and-gravel roofs it often replaces. Both go down over HVHZ-approved components with proper drainage, because in South Florida the roof that lasts is the one that sheds water fast. We will tell you straight whether your roof needs a re-cover or just a targeted repair, rather than selling you the bigger job by default. See our flat roof options guide to compare systems.

Flat roofs for homes and commercial buildings

Flat roofs cover mid-century homes and additions across South Florida, plus the warehouses, retail strips, and condo buildings all over Miami and Fort Lauderdale. The materials are similar, but the stakes differ. A commercial leak can shut down a tenant, ruin inventory, or trip a fire-suppression system, so response time and clean detailing matter even more.

We handle both sides. For larger buildings, our commercial roofing team works around your operating hours, rooftop equipment, and access needs. For a home, we keep the job tight, the site clean, and the timeline short. Either way the goal is identical: positive drainage, sound welded seams, and an HVHZ-approved surface that lasts. Call (954) 353-9770.

Flat & Low-Slope Roofing across South Florida

As a service-area business, we bring flat & low-slope roofing to your property anywhere in the tri-county area — including Hollywood, Pembroke Pines, Plantation and Delray Beach, and dozens of other neighborhoods. We don't run a storefront, which keeps our overhead and your price down, and it means our crews are on South Florida roofs every week. Wherever you are, the work is the same: an honest written estimate first, code-compliant HVHZ installation, and a clean job site when we're done.

South Florida is not one roofing market but many. A roof on Miami Beach or Key Biscayne fights salt air and full coastal hurricane exposure; a roof in Kendall or Homestead sits in Andrew country under intense UV; the historic barrel-tile estates of Coral Gables and the Grove have their own architectural rules; and inland Broward and Palm Beach communities add strict HOA color-and-material matching. We adjust the materials and the approach to where you actually live, instead of applying a one-size-fits-all spec. Browse all our service areas, explore our roofing guides, or call (954) 353-9770 to confirm we cover your street and book a free estimate.

Why South Florida homeowners choose us

  • Honest written pricing — every scope in writing, no surprise upcharges.
  • South Florida expertise — tile, flat, shingle, metal, coastal and condo roofs, plus HVHZ / NOA code.
  • Licensed & insured — Florida-licensed (CCC) roofing contractor, workers' comp and general liability. Verify at myfloridalicense.com.
  • Financing available — so a safe roof fits your budget.
FAQ

Frequently Asked Questions

Why does my flat roof pond water?

Because it lacks enough slope to drain, or a scupper/drain is clogged. In South Florida's heavy rain, standing water accelerates membrane failure; we re-slope or add drainage to fix it.

How long does a TPO roof last?

A properly installed TPO roof lasts roughly 15–20 years in South Florida's UV and heat. Correct slope and clean drains extend it.

Is a flat roof a problem during hurricane season?

Only a poorly detailed one. We reinforce seams and parapet flashing and correct drainage so the roof sheds tropical downpours and resists uplift.

Can you re-cover my flat roof instead of replacing it?

If the membrane and insulation are still sound and dry, yes — a re-cover is a cost-effective way to restore and extend it.

What Our Google Customers Say

Get a Free Roof Estimate in South Florida

Honest pricing, licensed crews, financing available. Talk to a real South Florida roofer today.

Schedule Free Estimate 📞 Call Now